Rite has manufactured High Temperature Hot Water Boilers with safety and reliability in mind for well over forty years. From large central heating plants to a wide variety of industrial process loads, these heavy duty watertube boilers are available in 16 different models, ranging from 398 to 10,456 MBH input (9.5 – 250 Boiler Horsepower). Capable of providing 250º to 340ºF water or higher, these boilers compare favorably to thermal hot oil heaters and high pressure steam boilers. High temperature water boilers have • no high cost thermal oil fluid • no coking • no environmental spill issues • superior heat transfer efficiency over thermal oil. Benefits over steam include • no auxiliary equipment such as: blowdown tanks, deaerators, water softeners, chemical treatment, feed pumps, steam traps, condensate return lines • no “open system” energy losses; less scale and corrosion.
So simple to maintain and operate, Rite High Temperature Hot Water Boilers feature complete waterside access so that virtually all scale and mud deposits can be seen and mechanically cleaned during a single scheduled maintenance shutdown. The result – Better fuel-to-water efficiency and lower operating cost over the life of your boiler investment. Consider a few of our other standard features: • Rites floating heads that eliminate pressure vessel cracks and broken welds caused by thermal stress cycling • Tubesheets up to 1-3/4″ thick that virtually eliminates tube loosening or weeping- and you have a better boiler by design.
Rite Power Burner Fired High Temperature Water Boilers must be specified when: Low NOx emissions are required or fuels other than natural gas will be used. While Power Burners are more expensive and use more electrical power than atmospherics, they do have one substantial advantage: by controlling the amount of air they use for combustion, Power Burners achieve higher combustion efficiencies than atmospherics – especially at less than full fire rate.
High Temperature Hot Water Boiler Advantages:
- 9.5 – 250 Boiler Horsepower
- M.A.W.P. to 325 PSI
- Temperatures to 400°F
- Steams in about 5 minutes from a cold start
- 99% steam quality under steady load conditions
- No steam baffles or separators required
- Extra thick shell and tubesheet resist corrosion
- hinged Headplates available for easy waterside access
- No handhold or manhole assemblies
- 25 year thermal shock warranty
- Nominal 80% maintainable efficiency
There are no reviews yet.