| Quantity: |
One (1) Boiler |
| Capacity: |
(200 HP) 6,900 lbs/hr |
| Design: |
Wetback |
| Heating Surface: |
1000 SQ.FT. of heating surface – 5 sq. ft per BHP |
| Design Pressure: |
150 PSIG |
| Dimensions: |
See attached drawing |
| Weight: |
Dry-13,300 lbs
| Wet - 22,515 lbs |
| Primary Fuel: |
Natural Gas |
| Secondary Fuel: |
#2 pressure atomizing fuel oil |
| NOx requirements: |
N/A (No FGR supplied) |
| Electrical: |
480/60/3 |
| Gas pressure: |
2 PSIG |
| Codes: |
UL, ASME CSD-1 and GE Gap(IRI) |
| Boiler Location: |
Indoors |
| Primary LWCO |
MM193 low water cutoff – modulating controls |
| Auxiliary LWCO |
Probe type – manual reset |
| Pressuretrols: |
Operating / Limit / Modulation |
| NEMA 1 – 12” x 12” Junction Box |
|
| Steam Pressure Gauge: |
Included |
| Safety Valves: |
Set at 150 PSI |
| Stack size: |
16”ID required |
| Feedwater Valves and 3 Valve By-pass |
| Bottom-Blowdown Valves prepiped |
| Full Length Perforated skimmer with metering valve |
| 3-Pass, Scotch Marine Firetube Boiler. |
| Built to ASME Code and National Board Rules |
| Full Skid Base |
| 2” Insulation and “galvanneal” sheet metal jacket on boiler shell |
| Hinged front and rear flue doors |
| Front and rear observation ports |
New and Used Equipment in Stock
Current Used Inventory:
